Call Us Today! 317-882-3500

Specialty Roofing

Trust the Best with your Central Indiana Roof Replacement

Central Indiana Specialty Roofing Systems

Our trusted Indiana High Performance Roof Installers are up to the task for your next project.  The Quality behind our Roof Systems is more than just the materials we install.  It’s every piece being installed to the highest standards while maintaining a consistent approach at understanding the unique aspects of each project.   A project manager will assist you in assessing the variables of your property and guide you through the material selection process.

** The following information is from our manufacturer.

 

RESIDENTIAL SPECIALTY ROOFING

Horizon-Loc

Horizon-Loc™ is a durable concealed fastener roof system with easy snap together installation. This architectural panel system uses minimally visible fasteners, giving your building a clean, attractive finish. The panel’s easy snap-on ribs attach rapidly with no hand seaming, so installation is less expensive than traditional standing seam.
General Information:Image result for horizon-loc

  • Panel rib height: 1″
  • Panel coverage: 16″ wide
  • Panel length: 3′ to 40′  in 1″ increments, maximum recommended length = 35′
  • Tensile strength: 50,000 psi minimum
  • Substrate: varies by option; Galvalume®
  • Gauge: 26
  • Recommended roof slope: 3:12 pitch or greater

 

 

Panel-Loc Plus

Panel-Loc Plus™ is a low rib (3/4”) panel which provides durable performance with an added striation on top of the rib that gives it even more strength. Panel-Loc Plus™ gives agricultural and light commercial projects, as well as residential roofs, the protection of steel with an attractive appearance.

 

General Information:Image result for panel loc plus

  • Panel rib height: 3/4″
  • Panel coverage: 36″ wide
  • Panel length: 26″ to 45′ in .5″ increments
  • Tensile strength: 80,000 psi minimum
  • Substrate: varies by option; Galvalume® (AZ-50) or galvanized (G90)
  • Gauge: 26 and 29
  • Recommended roof slope: 3:12 pitch minimum or greater

 

Panel-Loc 

Panel-Loc™ is a low rib (5/8”) panel that is best used for post frame barns and buildings, as well as residential roofing. Panel Loc™ is available in 26 and 29 gauge steel.

General Information:Image result for panel loc

  • Panel rib height: 5/8″
  • Panel coverage:  36″ wide
  • Panel length:  26″ to 45′ in .5″ increments
  • Tensile strength:  80,000 psi minimum
  • Substrate:  Varies by option; Galvalume® (AZ-50) or galvanized (G90)
  • Gauge:  26 and 29
  • Recommended roof slope:  3:12 pitch minimum or greater

 

 

 Slate Roofing

Slate quarried for roofing stock is of dense, sound rock and exceedingly tough and durable. Slate roofs have lasted a century, giving excellent long-term value, in contrast to other types of manufactured roofing which must be re-roofed three or four times within this same period.

Slate Roofing Tiles colors, sizes and texture afford many architectural effects, contributing to the appearance and beauty of any building. Our experienced staff can provide detailed information and architectural services from single size 1/4″ thickness applications to intermingled rough texture in random widths to graduated length and thickness. DWC Restoration sources its slate from some two-dozen different quarries and offers 14 different color choices.

vermont slate roof

 

 

 Wood Shake Roofing

Cedar Shake shingles have been used for hundreds of years and have proven their durability in all kinds of climates. They can be used to create individual buildings, whether traditional or modern, and their rich, warm colour and texture blend beautifully in any natural environment. The natural effects of aging and weathering give shingles and shakes, in time, an attractive silvery grey colour.

Weather Resistance
Proper application of shakes or shingles gives outstanding rigidity and resilience against high winds and pounding hail.

Thermal Conductivity
Cedar Shake Roofing has a unique cellular composition that makes a roof or wall of shingles a natural barrier to heat and cold, providing a high degree of thermal insulation.Western Red Cedar The Authentic Choice

Versatility
A feature unique to shingles is their flexibility. This enables them to follow complex contours in an architects design in both internal and external applications.

Sustainability

Concerns about the environmental impact of the production and use of building materials have focused the attention of architects and builders on the need to specify products which minimize atmospheric pollution and are produced from renewable resources.

 

 

COMMERCIAL STEEL/ METAL ROOFING

 

The Central Span™ panel has a traditional flat pan, vertical rib appearance, often preferred by traditional architects for superior appearance and performance. Central-Span™ roofs meet the requirements for a wide range of roof slopes, shapes, loads, weather and related conditions. It has many of the features required for architecturally shaped roofs.

General Information

  • Standing seam height: 2″
  • Panel coverage: 16″
  • Panel length: 36″ to 52′ in .5″ increments
  • Tensile strength: 50,000 psi minimum
  • 16 ENERGY STAR rated Fluropon® colors
  • Substrate: Galvalume®
  • Gauge: 24 (22ga special order only – contact your sales rep for details)
  • Mechanically seamed
  • Recommended minimum slope:  1/4 :12 or greater
  • Minor striations in the flat.
  • Clip has a full 3″ of thermal movement.
  • 90° or 180° seam.
  • Factory applied sealant.
  • One of the highest uplift ratings in the industry.

 

R-Loc™ is a 26 gauge commercial panel that is an excellent choice for projects that require commercial grade performance.  R-Loc™ is designed to maximize the potential of your structures, specifically the steel frame.  With its added purlin bearing rib, you can count on easier installation and a more pleasing appearance.

General InformationImage result for r-loc metal roof

  • Panel rib height: 1 1/4″
  • Panel coverage: 36″ wide
  • Panel length: 26″ to 45′ in .5″ increments
  • Tensile strength: 80,000 psi minimum
  • Substrate: Varies by option; Galvalume®
  • Gauge: 26
  • Recommended roof slope:1/2:12 or greater roof slopes and ideal for low pitch commercial roofs

M-Loc™ is a structural roof and wall panel that can be installed directly over purlins or joists.  The M-Loc™ panel is available in 26 gauge.  This commercial panel has long served customers with lasting durability in commercial type applications.Image result for m-loc metal roof

General Information

  • Panel rib height: 13/16″every 6 inches
  • Panel coverage: 36″ wide
  • Panel length: 26″ to 45′ in .5″ increments
  • Tensile strength: 80,000 psi minimum
  • Substrate: Varies by option; Galvalume®
  • Gauge: 26
  • Recommended roof slope: 1:12 pitch or greater

Horizon-Loc™ is a durable concealed fastener roof system with easy snap together installation.  This architectural  panel system uses minimally visible fasteners, giving your building a clean, attractive finish.  The panel’s easy snap-on ribs attach rapidly with  no hand seaming, making installation less expensive than traditional standing seam.

General InformationImage result for horizon loc metal roof

  • Panel rib height: 1″
  • Panel coverage: 16″ wide
  • Panel length: 3′ to 40′  in 1″ increments, maximum recommended length = 35′
  • Tensile strength: 50,000 psi minimum
  • Substrate: varies by option; Galvalume®
  • Gauge: 26
  • Recommended roof slope: 3:12 pitch or greater

Precision-Loc® is our 24 gauge commercial/industrial wall and soffit panel.  Precision-Loc® is available with one rib (perforated or solid),  and solid flat (no ribs).Image result for precision loc metal roof

General Information

  • Panel rib height: 1″
  • Panel coverage: 12″ wide
  • Panel length: 36″ to 35′ in .5″ increments
  • Tensile strength: 50,000 psi minimum
  • Substrate: Galvalume®
  • Gauge: 24
  • Uses concealed fastener system

Central Seam Plus® is a trapezoidal standing seam system designed for commercial and architectural projects.  Central Seam Plus®’ mechanically seamed system begins and ends in the high, reducing the risk of leakage at the rake.Image result for central seam plus

General Information

  • Standing seam height: 3″
  • Panel coverage: Available in:
    • 24″ with minor ribs – prepunched 6 holes or no punching
    • 18″ with minor ribs – prepunched 5 holes or no punching
  • Panel length: 26″ to 45′ in .5″ increments
  • Tensile strength: 50,000 psi minimum
  • Substrate: Galvalume®
  • Gauge: 24 (22 and 26 gauge material optional.  Contact sales rep for more information.)
  • Seam sealed with factory-applied hot melt mastic.

Central-Loc® is a snap-together trapezoidal roofing system that is an excellent choice for commercial applications.  Central-Loc® is manufactured from Galvalume® which offers two to four times the corrosion resistance of galvanized steel.Image result for central-loc

General Information

  • Standing seam height: 3″
  • Panel coverage:
    • 24″ with minor ribs – prepunched 6 holes or no punching
    • 18″ with minor ribs – prepunched 5 holes or no punching
  • Panel length: 26″ to 45′ in .5″ increments
  • Tensile strength: 50,000 psi minimum
  • Substrate: Galvalume®
  • Gauge: 24 (22 and 26 material optional.  Contact sales rep for more information.)
  • Recommended roof slope: 1/4:12 pitch or greater
  • Seam sealed with factory-applied hot melt mastic.

Central Snap® is a vertical 1 3/4″ snap-lock standing seam panel system that is sturdy and fire resistant, making it ideal for architectural and commercial applications. Installation is a snap, and its Galvalume® substrate offers two to four times the corrosion resistance of galvanized steel.  24 gauge flat sheets are also available.

General InformationImage result for central-snap

  • Standing seam height: 1 3/4″
  • Panel coverage: Available in 16″ and 18″ coverage with subtle striations between ribs
  • Panel length: 36″ to 52′ in .5″ increments
  • Tensile strength: 50,000 psi minimum
  • Substrate: Galvalume®
  • Gauge: 24 (22 gauge material optional. Contact sales rep for more information.)
  • Seam sealed with factory-applied hot melt mastic.
  • Available with a 1 3/16″ notch on either end of each panel for the ease of turning under; reducing installation labor and costs.
  • Recommended minimum slope:  3:12 or greater


Request Quote
  • Your Contact Information
    0
  • First Name*
    1
  • Last Name*
    2
  • E-mail Address*
    3
  • Phone Number*
    4
  • Street Address*
    5
  • City*
    6
  • State*
    7
  • ZipCode*
    8
  • *
    9
  • What Renovation can we help you with?
    11
  • Project Type*
    Full Exterior Renovation
    Roof
    Insulation
    Siding
    Windows
    Doors
    Exterior Painting
    Decks
    Porches
    Storm Damage Inspection
    Need a Second Opinion
    Other
    12
  • *
    13
  • *
    14
  • Additional Comments about your Project*
    15
  • 16